ASK FOR INFORMATION
Select one or more references to solicit Information.
Please fill in the form.
Rellene los campos obligatorios (*)
You have to accept the privacy policy
HEAD, HEADCUTS, MOULDS, WIRES AND CALIBRE MACHINES
- 26 available machines.
- ImagenReferenceDescription
GT-722Several pellet heads for PE and PVC
GT-1900Head cut in water. Brand Prealpina for 500 to 600 kg/hour with 10 h.p. engine. Centrifuge 7.5 h.p. engine and vibrator table to sieve material. With electrical pannel.
GT-1990Extrusion head for 45mm extruder
GT-2164Cut head in the water, Brand AST, 1000 UV / E type with 4,5kW motor, electrical panel and stainless vibrating table with water pump 1.1kW. 7.5kW vertical centrifuge.
GT-2369One Head of cable (spaghettis) with 38 holes, exit and diameter entered 70mm, was with extruder of 90mm.
GT-2384Head for profiles, 60mm extruder.
GT-2385Head for profiles, 60mm extruder.
GT-2386Head for profiles, 60mm extruder.
GT-2387Head for profiles, 60mm extruder.
GT-2388Profile head with 2 nozzles, for 60mm extruder
GT-2389Profile head
GT-2390Head for small tube, with male of 5 and 10mm for extruder of 30mm.
GT-2391Head for small tube, with male of 5 and 10mm for extruder of 45mm.
GT-2392Head for tube, maximum 40 mm, measuring 25 / 35mm, for extruder of 80mm.
GT-2393Head for tube, maximum 40 mm, measuring 18/22mm, for extruder of 70mm.
GT-2394Calibrator for the corner profile.
GT-2395Calibrator profile
GT-2396Row and calibrator for profiles, half-moon 115mm wide and 40mm high.
GT-2397Small calibrators for profiles and tubes up to 40mm.
GT-2399Thread head with 10 outputs.
GT-2400Coupling windows and lines for extruders.
GT-2544Head of threads for pellets. For extruder from 90 to 130 with 35 holes.
GT-2595Cut in head to water for pellets. Brand PRT, type WF 150. Year 2001. Centrifuge drying and electrical panel. Production approximately 150 a 250 Kg / Hour.
GT-2729Blade head with 520 mm gauge.
GT-2730Blade calibrator 380 mm.
GTE-453Head cut in the air for 45 to 60 mm. Extruder.